Solutions made for professionals
RAM Mounts Partner
RAM Mounts Partner
RAM Mounts Form-Fit Halteschale (mit Schlüsselverriegelung) für Getac ZX80 Rugged Tablet - 5.5mm Stromanbindung - AMPS 4-Loch Aufnahme - VESA 75x75 - Schrauben-Set
RAM Mounts Form-Fit Halteschale (mit Schlüsselverriegelung) für Getac ZX80 Rugged Tablet - 5.5mm Stromanbindung - AMPS 4-Loch Aufnahme - VESA 75x75 - Schrauben-Set €499.95

RAM Mounts Form-Fit Halteschale (mit Schlüsselverriegelung) für Getac ZX80 Rugged Tablet - 5.5mm Stromanbindung - AMPS 4-Loch Aufnahme - VESA 75x75 - Schrauben-Set

Product number: RAM-HOL-GE5PKLU
Product catalogue: Getac Catalog 2023 EN

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet.

To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.

Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used.

The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80.

An NFC repeater add-on module can be used to extend the device's internal NFC reader.

The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-GE5PKLU:

  • Compatible with the Getac tablet accessoires
  • Not compatible with the Getac 4-point hand strap accessory
  • Easy insertion and removal
  • Lockable with key
  • Additional mounting plate for attaching additional devices or accessories
  • Prepared for RAM Vent-Temp, Temp Right or NFC repeater
  • Input Connector: 5.5mm DC-Buchse
  • Input Voltage: 19V
  • Output Voltage: 14V
  • Input Cable Length: ca. 100 cm
  • Certifications: FCC, IC, CE, UKCA, WEEE & RoHS

Additional information:
This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap.

Devices shown are not included in the delivery.

Only the RAM-HOL-GE5PKLU holder is supplied.

Hole Pattern: AMPS 4-Loch
Manufacturer: Getac
Mounting: Schrauben
EAN: 793442021527

Compatible

RAM Mounts Aufbau-Set - runde Basisplatte (AMPS), mittlerer Verbindungsarm, VESA-Platte (75x75 mm Lochraster), C-Kugel (1,5 Zoll), im Polybeutel

RAM-101U-2461

(410338)

Variants from €99.95*
€104.95*

RAM Mounts Set mit Gegenplatte - C-Kugel (1,5 Zoll), mittlerer Verbindungsarm, 4-Loch AMPS

RAM-101-225B2U

(410786)

Variants from €104.95*
€109.95*

RAM Mounts Tough-Claw Set - C-Kugel (1,5 Zoll), Tough-Claw groß (Durchmesser 25,4-55,9 mm), mittlerer Verbindungsarm (ca. 145 mm)

RAP-401-202U

(583876)

Variants from €171.95*
€179.95*

RAM Mounts Schraubklemmen-Set - Schraubklemme (bis 76 mm Breite), mittlerer Verbindungsarm, VESA-Platte (75x75 Lochraster), C-Kugel (1,5 Zoll), im Pol

RAM-2461-247U-3

(580459)

Variants from €153.95*
€160.95*

Compatible Base

RAM Mounts VESA-Platte (75x75 mm Lochraster) - C-Kugel (1,5 Zoll), im Polybeutel

RAM-2461U

(410687)

Variants from €34.95*
€38.95*

RAM Mounts runde Basisplatte (AMPS) - C-Kugel (1,5 Zoll), im Polybeutel

RAM-202U

(410074)

Variants from €23.95*
€25.95*

RAM Mounts VESA-Platte (3,625 x 3,625 Zoll) - 75 x 75 mm Lochraster, D-Kugel (2,25 Zoll), im Polybeutel

RAM-D-2461U

(410584)

Variants from €48.95*
€54.95*

RAM Mounts Basisplatte rund - D-Kugel (2,25 Zoll), 120° Lochraster, 93,5 mm Durchmesser

RAM-D-202U

(410307)

Variants from €59.95*
€64.95*

Compatible Arms

RAM Mounts Verbindungsarm kurz - C-Kugel (1,5 Zoll), ca. 90 mm

RAM-201U-B

(410903)

Variants from €39.95*
€44.95*

RAM Mounts Verbindungsarm mittel - ca. 140 mm, für C-Kugeln (1,5 Zoll), im Polybeutel

RAM-201U

(410747)

Variants from €44.95*
€48.95*

RAM Mounts Verbindungsarm lang - C-Kugel (1,5 Zoll), ca. 230 mm

RAM-201U-D

(410648)

Variants from €79.95*
€84.95*

RAM Mounts Verbindungsarm kurz - ca. 129 mm, für D-Kugeln (2,25 Zoll), im Polybeutel

RAM-D-201U-C

(410582)

Variants from €89.95*
€94.95*

RAM Mounts Verbindungsarm mittel - ca. 213 mm, für D-Kugeln (2,25 Zoll), im Polybeutel

RAM-D-201U

(410306)

Variants from €135.95*
€139.95*

RAM Mounts Verbindungsarm lang - ca. 330 mm, für D-Kugeln (2,25 Zoll), im Polybeutel

RAM-D-201U-E

(410432)

Variants from €218.95*
€224.95*

Options

RAM Mounts GDS Strom-Modul - SAE/offene Enden, 10-32V DC Eingang, 19V DC Ausgang, Klinke (DC) 5.5 mm OD x 2.5 mm ID

RAM-GDS-CHARGE-V11U

(585959)

Variants from €56.95*
€44.95*

RAM Mounts GDS Strom-Modul - SAE/offene Enden, 24-60V DC Eingang, 19V DC Ausgang, Klinke (DC) 5.5 mm OD x 2.5 mm ID

RAM-GDS-CHARGE-V12U

(585960)

Variants from €47.95*
€49.95*

RAM Mounts NFC-Repeater - AMPS 4-Loch Anbindung

RAM-GDS-CAB-NFCU

(586400)

Variants from €119.95*
€122.95*

RAM Mounts Vent-Temp™ für runde Ventilatoren - inkl. Rückseiten-Anbindung für GDS Docking-Stations

RAM-VENT1-RND-50U

(586401)

Variants from €249.95*
€259.95*

RAM Mounts Vent-Temp™ für rechteckige Ventilatoren - inkl. Rückseiten-Anbindung für GDS Docking-Stations

RAM-VENT1-RCT-50U

(586384)

Variants from €297.44*
€259.95*