assembled in america
Filter
Mittlerer Arm
B-Kugel
RAM Mounts Saugfuss-Halterung Apple iPad mini 6 (ohne Schutzhüllen / -gehäuse) - B-Kugel (1 Zoll), EZ-Roll'r Halteschale
Die RAM Mounts Saugfusshalterung ist eine stabile Befestigungslösung für das Apple iPad mini 6 (ohne Schutzhüllen / -gehäuse). Diese Kompletthalterung besteht aus einem Saugfuss (mit Drehverschluss), einer Diamond-Basisplatte (Trapez), einem Verbindungsarm (90 mm), einer runden Basisplatte und der EZ-Roll'r Form Fit Halteschale für das Apple iPad mini 6.Die Halterung ist schnell auf glatten Oberflächen montiert und durch das Kugel-Arm-System für nahezu alle Betrachtungswinkel individuell einstellbar.Material: pulverbeschichtetes Aluminum, Hochfestigkeits-Verbundstoff (Saugfuss und Halteschale)Kugeldurchmesser: 2,54 cm (1 Zoll), B-KugelFarbe: schwarzHinweis: abgebildete Geräte gehören nicht zum Lieferumfang. Es wird ausschließlich die RAM Mounts Saugfusshalterung für das Apple iPad mini 6 geliefert.

RAM-B-166-AP36U

(586299)

79,00 €*

Mittlerer Arm
B-Kugel
RAM Mounts Fahrzeug-Halterung für Apple MagSafe - B-Kugel (1 Zoll), Basis für Getränkehalter

RAP-B-299-4-AP-MAGU

(585956)

68,00 €*

N E U
RAM Mounts X-Grip Lenker-Halterung für Smartphones breiter als 82,5 mm - mit Tough-Strap-Basis (Verbundstoff)
The RAM Tough-Strap is lowest profile rugged mounting solution for any bike or motorcycle handbebars. With two different size straps, easily install the RAM Tough-Strap on any mountain bike, road bike or e-bike with a simple twist of a knob. This RAM Tough-Strap Handlebar Mounting kit utilizes the RAM Pin-Lock system to secure the included Large RAM X-Grip for a low-profile fitting on your handlebar. The long strap is used for bar diameters ranging from 1.25"-1.38" while the short strap is used for diameters ranging from 0.875"-1". Utilize the extra rubber strip to cut down to the diameter range of 1"-1.125" for a more custom fit. Take the low-profile RAM Tough-Strap on your next adventure on and off the road. --- feature_description --- device_compatibility Apple iPhone 11 Pro Max

RAP-460-UN10U

(585991)

57,00 €*

Mittlerer Arm
B-Kugel
RAM Mounts Saugfuss-Halterung mit Tab-Tite Universal-Halteschale für 9-10.5 Zoll Tablets in Schutzgehäusen - B-Kugel (1 Zoll), mittlerer Verbindungsarm
Ideal for aircraft windshields, the RAM Tab-Tite holder for 9"-10.5" tablets with a case consists of a 3.3" diameter RAM Twist-Lock suction cup base and medium length double socket arm. The mount is designed with a RAM 1" diameter B size patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. --- feature_description --- device_compatibility ASUS ZenPad 10 with Case

RAM-B-166-TAB20U

(586012)

96,00 €*

Mittlerer Arm
B-Kugel
RAM Mounts Lenker-Halterung für Spot 4 Messenger - B-Kugel (1 Zoll), Klemmschelle, mittlerer Verbindungsarm
This kit includes the form-fitting, high-strength composite RAM EZ-Roll'r cradle for the SPOT Gen4, a medium length RAM double socket arm and zinc-coated handlebar U-Bolt base that accommodates rails from .5" to 1.25" in diameter. This ideal motorcycle mount is perfect for securing your SPOT Gen4 in the harshest conditions. --- feature_description --- device_compatibility SPOT Gen4

RAM-B-149Z-SPO6U

(586011)

63,00 €*

RAM Mounts X-Grip Halterung für Smartphones bis 82,6 mm Breite - kleine Tough-Claw mit flachem Profil und direkter X-Grip-Anbindung
The RAM X-Grip Phone Mount with Low-Profile RAM Tough-Claw (RAM-HOL-UN7-400-2U) consists of the small RAM Tough-Claw base and universal large RAM X-Grip phone holder, connected by the RAM Pin-Lock adapter. The RAM X-Grip features an X' design that expands and contracts to secure your phone, and includes a device tether recommended for outdoor applications. With the RAM Tough-Claw base connected, easily attach the RAM X-Grip on round, square, and odd-shaped rails and bars ranging from .625" to 1.5" in outer diameter. This kit is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with its case, sleeve, or skin when determining the overall size.

RAM-HOL-UN7-400-2U

(586276)

85,00 €*

Mittlerer Arm
B-Kugel
RAM Mounts Armaturenbrett-Halterung für 8 Zoll Tablets - B-Kugel (1 Zoll), mit Gegenplatte
This vehicle kit consists of a RAM Tab-Tite spring loaded holder for 8" tablets with a case, medium B size double socket arm, two 2.5" diameter round bases that contain the universal AMPS hole pattern, a 3" x 3" backing plate, and mounting hardware. The mount is designed with a 1" diameter B size rubber ball and socket system that features adjustment points at both ends of the double socket arm, allowing for near-infinite adjustability for ideal viewing angles. --- feature_description --- device_compatibility ASUS MeMO Pad 8 with Case

RAM-B-101B-TAB12U

(586019)

88,00 €*

RAM Mounts X-Grip Klemm-Halterung für Smartphones bis 114,3 mm Breite - kleine Tough-Claw mit flachem Profil und direkter X-Grip-Anbindung
The RAM X-Grip Large Phone Mount with Low-Profile RAM Tough-Claw (RAM-HOL-UN10-400-2U) consists of the small RAM Tough-Claw base and universal large RAM X-Grip phone holder, connected by the RAM Pin-Lock adapter. The large RAM X-Grip features an X' design that expands and contracts to secure your phone, and includes a device tether recommended for outdoor applications. With the RAM Tough-Claw base connected, easily attach the RAM X-Grip on round, square, and odd-shaped rails and bars ranging from .625" to 1.5" in outer diameter. This kit is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with its case, sleeve, or skin when determining the overall size.

RAM-HOL-UN10-400-2U

(586275)

87,00 €*

RAM Mounts X-Grip Lenker-Halterung für Smartphones bis 82,5 mm Breite - mit Tough-Strap-Basis (Verbundstoff)
The RAM Tough-Strap is lowest profile rugged mounting solution for any bike or motorcycle handlebars. With two different size straps, easily install the RAM Tough-Strap on any mountain bike, road bike or e-bike with a simple twist of a knob. This RAM Tough-Strap Handlebar Mounting kit utilizes the RAM Pin-Lock system to secure the included standard size RAM X-Grip for a low-profile fitting on your handlebar. The long strap is used for bar diameters ranging from 1.25"-1.38" while the short strap is used for diameters ranging from 0.875"-1". Utilize the extra rubber strip to cut down to the diameter range of 1"-1.125" for a more custom fit. Take the low-profile RAM Tough-Strap on your next adventure on and off the road. --- feature_description --- device_compatibility Apple iPhone 11

RAP-460-UN7U

(585992)

55,00 €*

RAM Mounts Beinhalterung Apple iPad mini Serien und mehr - Tab-Tite Halteschale, Gummibänder, Klettverschluss
Get the most out of your tablet with the RAM Tab-Tite spring-loaded, quick-release holder with the RAM Snap-Link Rotating Kneeboard Mount. This holder will support nearly any 8" tablet including the iPad mini 6, and all previous iPad mini models, with or without a thin case. This spring-loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, USB, power, and other ports, your tablet can be used just as it was intended. The side of the iPad mini 6 remains exposed for connecting the Apple Pencil. For pilots who like to have the iPad on their knee during flight, this solution will keep your device secured whether viewing in portrait or landscape mode, with the optional RAM Snap-Link ball adapter that lets you angle your tablet to eliminate sun glare. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPS hole pattern. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

RAM-BM-L1-SB1-TAB2U

(586238)

79,00 €*

Mittlerer Arm
B-Kugel
RAM Mounts Saugfuss-Halterung Samsung XCover Pro - B-Kugel (1 Zoll), mittlerer Verbindungsarm

RAM-B-166-SAM59U

(585599)

71,00 €*

RAM Mounts Beinhalterung Apple iPad mini in Gehäusen - Tab-Tite Halteschale, Gummibänder, Klettverschluss
Get the most out of your tablet with the RAM Tab-Tite spring-loaded, quick-release holder with the RAM Snap-Link Rotating Kneeboard Mount. This holder will support nearly any 8" tablet with a heavy duty case including the iPad mini 6 and all previous iPad mini models. This spring-loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, USB, power, and other ports, your tablet can be used just as it was intended. For pilots who like to have the iPad on their knee during flight, this solution will keep your device secured whether viewing in portrait or landscape mode, with the optional RAM Snap-Link ball adapter that lets you angle your tablet to eliminate sun glare. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPS hole pattern. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

RAM-BM-L1-SB1-TAB12U

(586237)

79,00 €*

Langer Arm
B-Kugel
Kurzer Arm
B-Kugel
RAM Mounts Motorrad-Halterung mit Quick-Grip Halteschale für Apple MagSafe kompatible Smartphones - B-Kugel (1 Zoll)
The RAM Quick-Grip product line gets an Apple MagSafe Charger compatible insert. Designed specifically to fit the official Apple MagSafe Charger, this RAM Quick-Grip phone holder has a removable backing plate so you can install your Apple MagSafe Charger directly into the holder with the ability to adjust the positioning of the charging disk depending on your iPhone 12 model iPhone. This insert allows a perfect and secure fit for the MagSafe's charging disk and is only compatible for the iPhone 12, 12 Pro, 12 Pro Max, and 12 mini with or without an official Apple MagSafe case. Included in this kit is the RAM Handlebar U-Bolt base with B size short length socket arm, perfect for handlebar mounting on your motorcycle, UTV, or e-bike. The U-Bolt base accommodates rails from 0.5" to 1.25" in diameter and includes a spacer for a tight fit without scratching the handlebar. Take advantage of your iPhone 12's magnetic MagSafe charging abilities with this MagSafe mount. --- feature_description --- device_compatibility Apple iPhone 12

RAM-B-149Z-A-UN15WU

(585980)

78,00 €*

Mittlerer Arm
B-Kugel
RAM Mounts Saugfuss-Halterung Apple iPad Pro 11 / Air 4 & 5 (ohne Schutzhüllen/-gehäuse) - B-Kugel (1 Zoll)
The RAM EZ-Roll'r cradle for the iPad Pro 11", iPad Air 4 & Air 5 secures your device in a form-fit holder while keeping the entire screen visible. Included is the RAM-B-166-202U which consists of a 3.3" suction cup twist lock base, double socket arm and round base adapter that contains the universal AMPS hole pattern. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM EZ-Roll'r cradle also features three attachment points on the back to attach a RAM round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The hole pattern found on the round base adapter will connect to most RAM cradles and 3rd party cradles.

RAM-B-166-AP23U

(586231)

98,00 €*

Mittlerer Arm
B-Kugel
Mittlerer Arm
B-Kugel
RAM Mounts Tough-Claw-Halterung für Spot 4 Messenger - B-Kugel (1 Zoll), mittlerer Verbindungsarm
This kit includes the form-fitting, high-strength composite RAM EZ-Roll'r cradle for the SPOT Gen4. With the RAM Tough-Claw base, you can easily attach your SPOT device to round, square, and odd-shaped rails and bars ranging from .625" to 1.5" in outer diameter. --- feature_description --- device_compatibility SPOT Gen4

RAM-B-400-SPO6U

(586111)

85,00 €*

RAM Mounts X-Grip Lenker-Halterung für Smartphones bis 82,5 mm Breite - Zip-Basis (Verbundstoff)
The RAP-460Z-UN7U consits of a dual strap base with RAM Pin-Lock backing and the popular spring-loaded RAM X-Grip phone holder, featuring an 'X' design that expands and contracts to provide a perfect fit for your device even if it's in a case. Made of high-strength composite and stainless steel, the RAM X-Grip phone holder is compatible with a wide variety of RAM double socket arms and mounting bases. This version of the RAM X-Grip fits phones ranging from 1.87" to 3.25" in width and keeps your device completely functional and accessible. Adjust the zip ties for attachment to a variety of rails, from a minimum of .5" in diameter. For outdoor applications like being used as a bicycle phone mount the RAM X-Grip includes a device tether that is recommended for added security and peace of mind.

RAP-460Z-UN7U

(586294)

46,00 €*

Mittlerer Arm
B-Kugel
RAM Mounts Saugfuss-Halterung Apple iPad mini 4/5 (ohne Schutzhüllen / -gehäuse) - B-Kugel (1 Zoll)
Die RAM Mounts Saugfusshalterung ist eine stabile Befestigungslösung für das Apple iPad mini 4/5 (ohne Schutzhüllen / -gehäuse). Diese Kompletthalterung besteht aus einem Saugfuss (mit Drehverschluss), einer Diamond-Basisplatte (Trapez), einem Verbindungsarm (90 mm), einer runden Basisplatte und der EZ-Roll'r Form Fit Halteschale für das Apple iPad mini 4/5.Die Halterung ist schnell auf glatten Oberflächen montiert und durch das Kugel-Arm-System für nahezu alle Betrachtungswinkel individuell einstellbar.Material: pulverbeschichtetes Aluminum, Hochfestigkeits-Verbundstoff (Saugfuss und Halteschale)Kugeldurchmesser: 2,54 cm (1 Zoll), B-KugelFarbe: schwarzHinweis: abgebildete Geräte gehören nicht zum Lieferumfang. Es wird ausschließlich die RAM Mounts Saugfusshalterung für das Apple iPad mini 4/5 geliefert.

RAM-B-166-AP20U

(586113)

71,00 €*

RAM Mounts X-Grip Lenker-Halterung für Smartphones breiter als 82,5 mm - Zip-Basis (Verbundstoff)
The RAP-460Z-UN10U consits of a dual strap base with RAM Pin-Lock backing and the popular spring-loaded RAM X-Grip phone holder, featuring an 'X' design that expands and contracts to provide a perfect fit for your device even if it's in a case. Made of high-strength composite and stainless steel, the RAM X-Grip phone holder is compatible with a wide variety of RAM double socket arms and mounting bases. This version of the RAM X-Grip fits phones ranging from 1.75" to 4.5" in width and keeps your device completely functional and accessible. Adjust the zip ties for attachment to a variety of rails, from a minimum of .5" in diameter. For outdoor applications like being used as a bicycle phone mount the RAM X-Grip includes a device tether that is recommended for added security and peace of mind.

RAP-460Z-UN10U

(586293)

49,00 €*